Aootech Brass Misting Nozzles for Outdoor Cooling System 22 pcs,0.012" Orifice (0.3 mm) 10/24 UNC

Aootech Brass Misting Nozzles for Outdoor Cooling System 22 pcs,0.012" Orifice (0.3 mm) 10/24 UNC
Product prices and availability are accurate as of 2019-08-10 12:07:49 EDT and are subject to change. Any price and availability information displayed on at the time of purchase will apply to the purchase of this product.

Manufacturer Description

From The Manufacturer

This misting nozzle does not need to use air compressed, can use liquid pressure to form a very fine mist, excellent misting effect, energy and water saving, low cost, good effect, no leakage. It is used a sturdy brass body with stainless steel orifice, widely used in dust removal, landscaping, cool down, artificial fog and other humidification place. Use of precision nozzle keypunch, sophisticated production, saving more than 10 times cost compared with the humidifier. The built-in stainless steel wafer through advanced forging process, strong durability, is 2.5 times the life of similar nozzle. Nozzle can fully spray use the pressure of tap water.

?The nozzle requires simple maintenance; soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage.

?Leak-proof, self-sealing o-ring included with each nozzle; no tape or sealant is required.

?A Filter on your mist system is highly recommended.

?Plugged up Nozzles are not covered by any warranty.


This misting nozzle does not have a filtering device. Please make sure that there is no debris in the water when you use it. It will be better if filtering device can be installed at the water inlet pipe. This can avoid clogging.

Included In The Package:

22 x Brass Misting Nozzles

Product Features

High Cost Performance:20pcs+2pcs(Extra Bonus)=22pcs. High Quality: Made of Brass,Never Rust. Best Choice For Outdoor Use With Cold Water. Screw Into Any 10/24-Threaded Mist Nozzle Opening. Operation Pressure:20-70kg/Cm. Flow Rate:80-145ml/Min. Minimal Water Use Of 1/2 Gallon Of Water Per Hour Per Nozzle.

Write a Review